Extractor2003 Models

1776 Country Lane Escondido, CA 92025USA

Tel. 1-760-432-0246

Fax 760-432-0646

P.R.O. Model EXTRACTION tm SLED
SPECIFICATIONS

This model replaces our best selling sled- the Junior ™

IN STOCK AND READY TO SHIP

ALLOW 7-10 DAYS FOR DELIVERY

recommended for three-seater pwcs for all types of waterborne rescue operations or recreational activities, including tow-in surfing.
molded Linear Low Density Polyethylene shell ( Highly U.V. Resistant from degradation or color fade, will not become brittle or fade from sun exposure like ABS plastic skins and polyethylene foam skins, exceptional rebound and tensile strength- will not crack, high flexural modulous, maintains overall shape, physical properties and will not warp under normal operating climate conditions, resistant to all chemicals. Monolithic molded part without laminated skins. Will not delaminate from water invasion at the seams. Easy to mend with plastic welder, resistant to folding or creasing under manufacturer recommended use guidelines.
hollow- air filled core, sealed hull with vent/drain plug (98% waterproof- better than the average 5% water absorption rate in sleds with a closed-cell expanded bead or extruded polypropylene or polyethylene foam core- nothing is 100% waterproof)
Length: 63 in. (160 cm)
Width: 38in. (96.5cm)
Thickness: 3.85 in at thickest point (10cm), Tail is tapered at 2.5 inches thick (6.75 cm) so that the sled will not have too much flotation, and will sink a few inches under water while the pwc is at idle. (Stretcher or Litter baskets had been in widespread use for many years, especially in swift water or river conditions because the basket would sink under the water several inches and allow the rescue swimmer to place the victim in the basket at the water level.) Likewise, this feature in the PRO model sled allows rescue swimmers to easily place hypothermic or unconscious victims upon sled deck from the water level without having to "lift" the victim up onto a sled as one would have to do with a sled that has too much buoyancy. The PRO Sled tail lifts back up on top of water surface and planes efficiently while pwc is moving forward. A much better improvement and application over the litter basket, the PRO sled offers a more comfortable, stable, and secure ride.
Some of our competitors claim that their product is better because their sleds have more flotation in the tail area. A four inch thick tail, with the additional flotation is great if you are sitting or laying on the sled in the open ocean or surf zone for several hours and need to stay out of the water, but for the most part, rescues or tow surfing pickups take place within a matter of minutes or seconds and prolonged riding on the sled is seldom used. People typically sit on the pwc seat if traveling long distances or if they are going to be on the water for more than a few minutes. THE MAIN IDEA BEHIND THE USE OF THE PWC AND SLED HAS ALWAYS BEEN TO GET THE VICTIM OUT OF DANGER AND BACK TO SHORE IN THE SHORTEST TIME POSSIBLE! TREAT THE VICTIM AFTER THEY ARE OUT OF DANGER. CPR CAN STILL BE PERFORMED ON THE PRO SLED EFFICIENTLY BY STRADDLING THE VICTIM WHILE THE PWC IS MOVING FORWARD AND MAKING PROGRESS BACK TO SHORE.
Capacity: 400lbs.(180 kg)or two adults.
Weight: is approximately 45 lbs (20kg)
Available in Quick Hitch or Tie Down Versions
3/8" thick PVC Foam Deck Pad-
Very Comfortable
( Durable and provides the right amount of traction. Non-slippery like the polyethylene bodyboard foams or non textured PVC foams. Non-Abrasive and will not create skin rashes like textured medium density EVA Trac-Top type foams)
8 Handgrips or 10 Handgrips (Last Chance Handgrips as an option) Made from 5000lb test nylon webbing, overmolded with proprietary, flexible elastomers, very durable and resistant to the elements. Handgrips are anchored to the sled hull using 7000lb test brass mold-in inserts and stainless fasteners that will not rust. Fasteners are secured from backing out using Lok-tite. You will not find a more comfortable secure-feeling handgrip on any other sled! This is one of the best features our customers comment on after tying their sled out for the first time.
Vibration Issues- The PRO Extraction Sled tm utilizes flexible linear low density polyethylene, flexible urethanes or EVA copolymers as bumpers at the connecting points, and a cushioning deckpad. All of these items have been used to reduce vibration caused from pwc motors. The PRO sled, being a molded sled, transfers no more insignificant vibration than any other sled on the market, contrary to what competitors may like you to believe.

Vent Drain PLug on hollow, molded PRO model

Colors:
red
yellow
military green
black

PRICING

Basic Tie Down Version with Rope Rigging/bumper (Similar to Standard Connection offered by bodyboard sleds) , Utilizes universal, convenient 3-point hookup to all makes and models of pwcs. The attachments are non-invasive as they are already molded into the sled as holes for rigging. These attachment points will not fail as they go through the entire hull and spread the load evenly across the surface. Rope and shackle are used and attached to the center main holes in the sled for the center attachment point, bungee cords and carabineers are attached to the outboard holes in the sled hull for the other 2 attachment points. Rope and bungees are protected from fraying on the sled side by sleeving the rigging through clear pvc hose. U-bolts to be installed on pwc hull for mounting sled to the pwc are included ( All pwcs require these U-bolts installed on all tie down sleds for a proper 3-point hookup, as pwc manufacturers will not provide these proper attachment points on their craft from the factory for liability reasons). Nose of sled is protected through use of a replaceable bumper.
PRICE= $1250.00USD

Direct Connect- Tie Down Version with Aluminum Plate/Pin/Shackle to U-Bolt Main Attachment/bumper
Utilizes universal, convenient 3-point hookup to most makes and models of pwcs. The attachments are non-invasive as they are already molded into the sled as holes and mold in threaded insert plates for rigging and mounting the direct connect aluminum nose plate to. These attachment points will not fail as they are molded into the hulll material as one unit, go through the entire hull and spread the load evenly across the surface. A shackle is used to connect to the pwc main U-bolt and to the pad eye tube attached to the sled nose plate for the center attachment point, bungee cords and carabineers are attached to the outboard holes in the sled hull for the other 2 attachment points. Rope and bungees are protected from fraying on the sled side by sleeving the rigging through clear pvc hose. U-bolts to be installed on pwc hull for mounting sled to the pwc are included ( All pwcs require these U-bolts installed on all tie down sleds for a proper 3-point hookup, as pwc manufacturers will not provide these proper attachment points on their craft from the factory for liability reasons). Nose of sled is protected through use of a replaceable bumper. PRICE= $1599.00USD

Quick Hitch Version –Military Duty

Most Durable, Most Stable, Least Wear and Tear on PWC transom and sled. A stainless steel hitch box and hitch bar mounts to the pwc using stainless steel hardware and urethane components. This system allows the sled to be mounted properly without having to have the nose of the sled on the pwc transom ( which has always posed a problem on sled utilization with a pwc for wear and tear on both the sled and the pwc. )
Quick Hitches are universal in most applications, but specific mounting plates need to be used for certain pwc makes and models. Quick Hitches come with a padded hitch boot covering to protect body parts from coming in contact with the hitch while sled is in use. Lifetime Warranty on welds from cracking.
PRICE= $2100.00USD List

Sample Installation Procedure of Kawasaki Hull Below. Other PWC Makes are similar, but require an elevated hitch box mounted on transom as well.

*NOTE: The best part of the Extractor Sled is that it is the ONLY sled that has been designed so that you do not have to replace the entire sled or a significant part of the sled should a part or component break or wear out. Instead, simply replace the worn out component! A parts list, along with prices can be found on our terms and warranty page.-click here

Shipping Not Included- Contact Us for a Quote

We also specialize in the custom manufacturing of sleds of various shapes and sizes to outfit your special application. Give us a call to see what we can do for you!

IMPORTANT- PLEASE READ!!!!!!

Every pwc has a different hull design, different weight displacement, center of gravity, horsepower, towing capacity, handling characteristics, and wake output configuration. They are also used for different rescue applications, changing the dynamics of how the pwc handles in the particular application. For this reason Extractor custom manufactures and designs its sleds with dimensions, which are best suited for the make and model pwc being used, and for the application. Extractor's sled designs have been thoroughly time-tested using Key Human Factors Studies to determine the overall design and the materials that go into them.

All of our sled models can use the basic tie down, the intermediate tie-down/direct connect, or the military duty Quick Hitch versions. All Hand Crafted sled models (Elite, Mega, or Custom Design) will be made to use the attachment version as specified by the customer and is reflected in the product price. At this time, only the PRO model is made featuring all the necessary internal hardware or features for interchanging between attachment versions without modifications. This is our most versatile model for using the same sled in different applications and behind different pwc models. If the sled model of your choice is to be used behind different pwc models, the basic tie down or the intermediate tie down/direct connect version is recommended. Every different model pwc hull using requires a custom hitch configuration designed to attach properly to the rear transom area and allow the sled to perform its best!

Let us recommend the sled best suited for your application. Email or Call for any questions you may have.